NAME OF THE MOTO: CX 501-R
BUILDER: Elias Shaooli and equipment Shaooli Design Motorcycles
MODEL: CX500 Custom
PRODUCTION YEAR: 1981
REBUILDING YEAR: 2016
FRAME: The two original rear shock absorbers were replaced by a single shock absorber.
FRAME WORK: Heavy back is short and was replaced by a small base on which stood a single seat and the swing was reinforced.
MOTORCYCLE ENGINE: Stock
EXHAUST SYSTEM: Header made of stainless steel and akrapovic tip with carbon fiber delivers a power of 12% + HP.
FRONT SUSPENSION: Inverted Suspension Showa
Rear Suspension: Mono Shock
TIRES: Conti-Attack 120-70-R17 Front and Back 160-60-R17
BRAKES: Dual front, ventilated and floating disc with two piston Tokico calipers and the rear brake is drum.
INSTRUMENTS: speedometer with digital tachometer and grips Moto Gadget
The gas tank is personalized with perforations in which are placed a mesh and in the side we install a fuel Sight Gauge Kit
The seat was manufactured in fiber carbon and fiberglass for added rigidity and lighter weight.
The wheels were replaced by one of 42 aluminum spokes.
The back cover was made in fiber carbon.
The front fender was manufactured in carbon fiber.
Supports for the front fender were made of metal with the design of the brake disc.
The headlamp holders were made of metal with front disc design.
Spark plug wires were replaced by a larger red for more spark.
The CDI was changed to an ignition system which can be calibrated and adjusted with a laptop.
A carburetors was changed diaphragms, pistons needles, suspenders, jets of high, low and air.
The air filter box was replaced with a stacks of aluminum in one piece.
The deposit antifreeze off.
Headlight, rear light, stop and turn signals are LEDs.
The footrest is swept back and put some aluminum.
Glossy black frame
Suspension bars in gold
Rear shock in yellow
Rims and spokes in satin black with red nipples
Tank and single seat in silver with carbon fiber accents
Front fender made in carbon fiber
High temperature paint in the engine is matte black with head covers and glossy black details in silver
APPROXIMATE HOURS OF WORK IN THE PROJECT: 350 hours